| DODGE WSTU-SCED-20M Mounted Units & Inserts | d:15.88 mm; H:112 mm; J:90 mm; s1:30.5 mm; B1:43.5 mm; e:19 mm; A:30.3 mm; Weight:0.57 kg; d1:32.4 mm; C0:6.65 kN; |
| DODGE P2B-LTB7-208 Mounted Units & Inserts | A:24 mm; Recommended tightening torque for set screw:8 Nm; A2:37.05 mm; Designation of bearing:US208-24G2T04; S:9 mm; J:119 mm; H:148 mm; N:14mm; T max.:100 °C; L:104 mm; |
| DODGE F2BZ-SXR-40M Flange Block Bearings | L1:104 mm; A2:58.5 mm; C:43.55 kN; Designation of housing:FA211N-; S:11.8 mm; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; B:45.3 mm; T min.:-20 °C; Dz:110 mm; |
| DODGE FB-SCEZ-35M-PCR Flange Block Bearings | Weight:1.1 kg; T min.:-20 °C; A1:12 mm; J:82.5 mm; s1:19.05 mm; Designation of housing:FE206-; Designation of bearing:UC206-20G2L4; S:15.9 mm; N:11,5mm; T max.:100 °C; |
| DODGE FC-GTM-85M Flange Block Bearings | C0:20.8 kN; Recommended tightening torque for set screw:8 Nm; N1:25 mm; H:105 mm; d:41.28 mm; S:19 mm; C:31.85 kN; Designation of bearing:UC209-26G2T04; Designation of housing:PH209N-; G:M6x1; |
| DODGE WSTU-SC-211 Take Up Unit Bearings | Expansion Type:Non-Expansion; Seal Type:Single Lip; Housing Material:Cast Iron; Bearing Duty:Normal Duty; Max Bearing Speed:6000 rpm; Bearing Family:Grip Tight Ball Bear; Bearing Inner Ring Material:Steel; Ball Bearing Housing Series:212 Series; UPC:782475883165; Bearing Outer Ring Material:Steel; |
| 3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE EP2B-IP-300R Pillow Block Bearings | Lubrication hole on inner ring:Oui/Yes; F:52 mm; d:45 mm; Precision class:P0; B:23 mm; da min:49 mm; ras max:0.6 mm; Mass:0.09 kg; Brand:NTN; rs min:0.6 mm; Size (mm):3 Inch | 76.2 Millimeter x 3.5 Inch | 88.9 Millimeter x 3.125 Inch | 79.38 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 1.453 Inch | 36.9 Millimeter x 1.689 Inch | 42.9 Millimeter DODGE P2B-GTH-25M-E Pillow Block Bearings | C0:20.8 kN; T max.:100 °C; N1:24 mm; L:197.5 mm; H:52.4 mm; Recommended tightening torque for set screw:11.5 Nm; C:31.85 kN; J:151.5 mm; N:14mm; A1:35 mm; Size (mm):0.984 Inch | 25 Millimeter x 1.453 Inch | 36.9 Millimeter x 1.689 Inch | 42.9 Millimeter ; |
| DODGE P2B-SXRED-215 Mounted Units & Inserts | Brand:NTN; Da max:117 mm; d:70 mm; ra max:1.5 mm; Dynamic load, C:119 kN; Max operating temperature, Tmax:120 °C; da max:82 mm; D:125 mm; E:113.5 mm; Nlim (grease):5,000 rpm; |
| 6.693 Inch | 170 Millimeter x 10.5 Inch | 266.7 Millimeter x 7.5 Inch | 190.5 Millimeter DODGE P4B-E-170MR Pillow Block Bearings | Designation of closed end cover:SCCE206; e:18 mm; L:108 mm; T min.:-20 °C; S:9 mm; A2:44.7 mm; B1:35.7 mm; C0:11.2 kN; A1:13 mm; Z:53.3 mm; Size (mm):6.693 Inch | 170 Millimeter x 10.5 Inch | 266.7 Millimeter x 7.5 Inch | 190.5 Millimeter ; |
| DODGE NSTU-GTM-111 Take Up Unit Bearings | Radial clearance class:C3; Da max:36 mm; rs min:0.6 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.21 kN; Characteristic outer ring frequency, BPF0:2.63 Hz; Min operating temperature, Tmin:-20 °C; Nlim (grease):18,000 rpm; Characteristic cage frequency, FTF:0.38 Hz; f0:12.8; |
| 3.438 Inch | 87.325 Millimeter x 4.17 Inch | 105.918 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE EP4B-IP-307LE Pillow Block Bearings | s1:33.4 mm; L1:87 mm; A5:19.2 mm; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; P:300 mm; S:11 mm; L3:83 mm; B:30.2 mm; Designation of housing:T209N-; Size (mm):3.438 Inch | 87.325 Millimeter x 4.17 Inch | 105.918 Millimeter x 3.75 Inch | 95.25 Millimeter ; |