| DODGE FB-GT-015 Flange Block Bearings | L:140 mm; d:60 mm; Weight:4.01 kg; N:23mm; s1:32.55 mm; e:29 mm; C:52.5 kN; Dz:120 mm; B:65.1 mm; A1:18 mm; |
| 1.438 Inch | 36.525 Millimeter x 2.625 Inch | 66.675 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE EP2B-IP-107R Pillow Block Bearings | d:40 mm; Fatigue limit load, Cu:0.81 kN; rs min:1.1 mm; Max operating temperature, Tmax:120 °C; D1:70.4 mm; Mass:0.37 kg; Dynamic load, C:28.7 kN; Characteristic outer ring frequency, BPF0:3.61 Hz; d1:50.3 mm; B:18 mm; Size (mm):1.438 Inch | 36.525 Millimeter x 2.625 Inch | 66.675 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE P2B-LTB7-208 Mounted Units & Inserts | A:24 mm; Recommended tightening torque for set screw:8 Nm; A2:37.05 mm; Designation of bearing:US208-24G2T04; S:9 mm; J:119 mm; H:148 mm; N:14mm; T max.:100 °C; L:104 mm; |
| DODGE F4B-SC-203 Flange Block Bearings | Characteristic outer ring frequency, BPF0:3.57 Hz; ra max:1 mm; Brand:SNR; d1:37.9 mm; Characteristic inner ring frequency, BPFI:5.43 Hz; da max:37.9 mm; da min:35 mm; Characteristic rolling element frequency, BSF:4.62 Hz; Nlim:5,200 rpm; Fatigue limit load, Cu:0.51 kN; |
| 4.5 Inch | 114.3 Millimeter x 6.75 Inch | 171.45 Millimeter x 5.75 Inch | 146.05 Millimeter DODGE P4B-DI-408RE Pillow Block Bearings | Ship Weight:32.31 LB; Seal Type:Triple Lip; Shaft Attachment Type:SETSCREW; UPC:782475725793; Expansion Type:Non-Expansion; d:2.4375 in; Bearing Series:207 Series; Housing Type:2 Bolt Pillow Block; Base to Center Hight Numeric:3.2500 in; Housing Product Type:K / DI; Size (mm):4.5 Inch | 114.3 Millimeter x 6.75 Inch | 171.45 Millimeter x 5.75 Inch | 146.05 Millimeter ; |
| 1.75 Inch | 44.45 Millimeter x 2.219 Inch | 56.363 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-SXRH-112-E Pillow Block Bearings | J:111 mm; e:28 mm; T max.:100 °C; N:18mm; Weight:2.52 kg; A:44 mm; Designation of housing:FE210-; A2:60.6 mm; Recommended tightening torque for set screw:16.8 Nm; B:51.6 mm; Size (mm):1.75 Inch | 44.45 Millimeter x 2.219 Inch | 56.363 Millimeter x 2.25 Inch | 57.15 Millimeter ; |
| DODGE INS-GT-08-CR Mounted Units & Inserts | J:52 mm; S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; C0:6.65 kN; L:76 mm; A:40 mm; Z:45.6 mm; L1:22 mm; C:12.8 kN; |
| DODGE LFT-GT-106 Flange Block Bearings | B1:43.5 mm; C0:6.65 kN; m:5 mm; d:19.05 mm; C1:4.4 mm; B:34 mm; D:47 mm; Weight:0.22 kg; T max.:100 °C; r:0.6; |
| DODGE WSTU-SCM-35M Take Up Unit Bearings | D:190 mm; Characteristic inner ring frequency, BPFI:9.28 Hz; Nlim:4,300 rpm; Number of lubrication holes:0; Da max:176 mm; Min operating temperature, Tmin:-40 °C; rs min:3 mm; D1:161.5 mm; Characteristic cage frequency, FTF:0.42 Hz; e:0.22; |
| 3.5 Inch | 88.9 Millimeter x 4.172 Inch | 105.969 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P2B-IP-308R Pillow Block Bearings | d:33.34 mm; L3:64 mm; N1:16 mm; Weight:1.66 kg; SW:3.97 mm; Designation of housing:T207N-; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; L2:13 mm; S:17.5 mm; Size (mm):3.5 Inch | 88.9 Millimeter x 4.172 Inch | 105.969 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| DODGE INS-DLM-112 Insert Bearings Spherical OD | Dz:110 mm; J:130 mm; Designation of bearing:SUC211-32; N:19mm; T min.:-20 °C; Designation of open end cover:SCOU211-32; e:25 mm; A2:58.4 mm; s1:27.8 mm; Recommended tightening torque for set screw:18.7 Nm; |
| DODGE WSTU-SCM-55M Take Up Unit Bearings | T min.:-20 °C; H:98 mm; G:R1/8"; d:35 mm; B:42.9 mm; H2:41 mm; Z:17 mm; SW:4 mm; s1:21.45 mm; Designation of housing:SP206-207/72N-; |